| Thermal properties |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Burning behavior UL 94 | UL 94 | 1.2 mm (BK) | Class | V-0 |
| Burning behavior UL 94 [UL recognition] | UL 94 | 1.5 mm | Class | V-0 |
| Burning behavior UL 94 [UL recognition] | UL 94 | 1.0 mm (BK) | Class | V-0 |
| Burning behavior UL 94 [UL recognition] | UL 94 | 3.0 mm | Class | V-0 |
| Burning behavior UL 94 [UL recognition] | UL 94 | 1.2 mm | Class | V-1 |
| Coefficient of linear thermal expansion, normal | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.7 |
| Coefficient of linear thermal expansion, parallel | ISO 11359-1,-2 | 23 to 55 °C | 10^-4^/K | 0.7 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 1.0 mm | °C | 850 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 1.5 mm | °C | 960 |
| Glow wire test (GWFI) | IEC 60695-2-12 | 3.0 mm | °C | 960 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 1.0 mm | °C | 875 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 1.5 mm | °C | 850 |
| Glow wire test (GWIT) | IEC 60695-2-13 | 3.0 mm | °C | 900 |
| Relative temperature index (Electric strength) | UL 746B | 0.75 mm | °C | 115 |
| Relative temperature index (Tensile impact strength) | UL 746B | 0.75 mm | °C | 105 |
| Relative temperature index (Tensile strength) | UL 746B | 0.75 mm | °C | 115 |
| Resistance to heat (ball pressure test) | IEC 60695-10-2 | | °C | 134 |
| Temperature of deflection under load | ISO 75-1,-2 | 0.45 MPa | °C | 136 |
| Temperature of deflection under load | ISO 75-1,-2 | 1.80 MPa | °C | 121 |
| Vicat softening temperature | ISO 306 | 50 N; 120 °C/h | °C | 144 |
| Vicat softening temperature | ISO 306 | 50 N; 50 °C/h | °C | 142 |
| Mechanical properties (23 °C/50 % r. h.) |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | 23 °C | kJ/m² | 68P |
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | -10 °C | kJ/m² | 50C |
| Charpy notched impact strength | ISO 21305/based on ISO 179/1eA | -30 °C | kJ/m² | 20C |
| Flexural modulus | ISO 178 | 2 mm/min | MPa | 2400 |
| Flexural strength | ISO 178 | 2 mm/min | MPa | 90 |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | 23 °C/ 3 mm | kJ/m² | 60P |
| Izod notched impact strength | ISO 21305/based on ISO 180/A | -30 °C/ 3 mm | kJ/m² | 15C |
| Nominal strain at break | ISO 527-1,-2 | 50 mm/min | % | > 50 |
| Puncture energy | ISO 6603-2 | -30 °C | J | 55 |
| Puncture energy | ISO 6603-2 | 23 °C | J | 54 |
| Puncture impact properties - maximum force | ISO 6603-2 | -30 °C | N | 6100 |
| Puncture impact properties - maximum force | ISO 6603-2 | 23 °C | N | 5100 |
| Strain at break | b.o. ISO 527-1,-2 | 50 mm/min | % | 135 |
| Stress at break | ISO 527-1,-2 | 50 mm/min | MPa | 66 |
| Tensile modulus | ISO 527-1,-2 | 1 mm/min | MPa | 2300 |
| Yield strain | ISO 527-1,-2 | 50 mm/min | % | 6 |
| Yield stress | ISO 527-1,-2 | 50 mm/min | MPa | 62 |
| Rheological properties |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Melt volume-flow rate | ISO 1133 | 300 °C/ 1.2 kg | cm³/10 min | 9 |
| Molding shrinkage, parallel/normal | b.o. ISO 2577 | Value range based on general practical experience | % | 0.6 - 0.8 |
| Electrical properties (23 °C/50 % r. h.) |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Comparative tracking index CTI | IEC 60112 | Solution A | Rating | 200 |
| Surface resistivity | IEC 60093 | | Ohm | 4E17 |
| Volume resistivity | IEC 60093 | | Ohm*m | 9E16 |
| Processing conditions for test specimens |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Injection molding - Injection velocity | ISO 294 | | mm/s | 200 |
| Injection molding - Melt temperature | ISO 294 | | °C | 300 |
| Injection molding - Mold temperature | ISO 294 | | °C | 80 |
| Other properties (23 °C) |
|---|
| 属性名称 | 测试标准 | 测试标准 | 单位 | 数值 |
|---|
| Density | ISO 1183-1 | | kg/m³ | 1200 |
